How to connect the portable power station by using the Jackery APP

The mobile APP has two methods for controlling the portable power station: Bluetooth and WiFi. When using it for the first time, establishing a Bluetooth connection is a must. After the Bluetooth connection is established, the WiFi connection is available.
The device will display the corresponding icon based on which connection is successful. If the connection fails, both icons will flash simultaneously (please note: when using Bluetooth for the first time, the device must be connected to a network that supports it).
2.1 Bluetooth connection
1) Open the APP and click the "Add" button or the "+" icon on the top right corner.
2) After the storage is powered on, please confirm that the Bluetooth and WIFI icons on the screen are flashing.
3) Scan the attached device (if there is a device that can be scanned, it will be displayed in a list).
4) Click on the corresponding device list to bind the device, and the APP will redirect to the device details page.
2.2 WiFi connection
1) Click the cloud connection icon on the top right corner to start the WiFi remote connection.
2) Select the WiFi that can be connected from the scanned available WiFi list; click the corresponding WiFi list and enter the correct WiFi password.
3) After entering the correct WiFi password, please click the "OK" button to start the WiFi connection.
4) Once the WiFi connection is successful, the APP will redirect to the device details page.