| Type of Product Output Current | Pure Sine Wave |
| Product Color | Black |
| Product AC Input Specification | AC100V~120V, 60Hz,
15Amax |
| Noise Level of Product Cooling Fan | ≤ 30dB |
| Are additional accessories required to connect the solar panel? | ■ Regarding the necessity of purchasing additional series boxes:
1 or 2 Panels: Can be connected using the included cable. No purchase required.
4 Panels: Requires 2 × SolarSaga Adapters (for Pro/Plus/V Series). |
| Does the AC charging cable include a grounding wire, and how should it be used? | Grounding wire included. |
| Maximum Number of Solar Panels That Can Be Connected | Supports connection for 1 panel / 2 panels / 4 panels. |
| Supports Charging with Jackery Products? | Support |
| Is the AC charging cable UL certified? | Yes, the AC charging cable included with the portable power supply bears the UL certification mark, ensuring safe use. |
| Can wall charging and Solar charging be performed simultaneously | Supported. |
| Plug type and usage scenario for the 50A output port on Power Station | / |
| Can this be used to start a car when the battery is dead? | We apologize for any inconvenience, but our portable power stations do not support use as a jump starter.
Our products are primarily designed to supply power to household appliances and outdoor devices. They are not intended to deliver the high burst current required to start a vehicle engine.
In general, jump starters are specifically designed to:
Deliver a very high instantaneous current
Support the starting characteristics of vehicle batteries
Because of this, their structure and intended use differ significantly from portable power stations.
For this reason, our portable power stations cannot be used to start a car engine or charge a vehicle battery when it is depleted. For safety reasons, we strongly recommend not using the product as a jump starter.
If your vehicle battery is dead, we recommend using a dedicated jump starter or contacting roadside assistance. |
| How much battery capacity is typically lost due to self-discharge when the power station is not in use? | Around 1%-3% per month |
| About app settings when the battery is fully depleted
For example, if the current app settings are “Battery Saving Mode | Disabled” and “Auto Power-Off: Never,” will these settings remain the same after the battery is drained and then recharged? Or will they be reset to default?: These settings will remain unchanged once the battery is restored, provided no reset is performed. |
| Is the neutral wire floating or Bonded? | floating |
